Payment & Shipping Terms:
|Vibration Warning Mode (manual Shift)
|Beep Sound Warning Mode (Default)
|Warning Of Strong Signal In Around
|CAM / Bug / LTE:
|Analog / Spread Spectrum Signal Of Camera, Bug And Cellphone
|Digital Signal Of WiFi And IP Camera
|Battery Power Running Down
|Status Of Battery Charging
cell phone signal detector,
wireless camera detector
Sensitivity Adjustment Wireless Signal Detector For 3G2100MHz Detection and WiFi Hidden Camera
Power-on self-test, intelligent display of all working status, including charging and alarm status and signal CAM/BUG/LTE
Distinguished from the Wifi signal. A reliable default benchmark for sensitivity. 8 LED signal strength. Two alarm modes and a strong signal red light alarm. Automatically indicates the signal category. Professional 3G testing. The detection of the mobile phone in the standby state effectively recognizes the WIFI hidden camera and supports the charging treasure. With LENS finder - detection for wired cameras. With the directional antenna, according to the reduction of the detection range, the range of the range of the antenna detection is gradually reduced. Although it is mainly aimed at sneak shots, it also has a good effect on the 2g3g4g bugs of mobile phones.
Every time this device is switched on, this device will do power-on self-test of all functions and all the LEDs of this device will be lit up.
Then the 8 signal strength indication LEDs will be put out one-by-one, from 8 7 6 … to 0. The 7-segement LED also shows 8 7 6 … to 0 synchronously.
|Vibration warning mode (manual shift)
|Beep sound warning mode (Default)
|Warning of strong signal in around
|CAM / Bug / LTE
Analog / Spread spectrum signal of
Camera, bug and cellphone
|Digital signal of WiFi and IP camera
|Battery power running down
|Status of battery charging
3. RELIABLE DEFAULT BENCHMARK
After this device finished its self test, the sensitivity will stay at factory default benchmark of “Level 8” and the digit display shows 8, this is default sensitivity benchmark.
The default benchmark is one of our core technology, can fit for different environments all over the world. If this device beeps or vibrates and some of the LED light up, it means that there should be some wireless signals or environment noises around.
The 8-LED bar will light up according to the signal strength from low to high, green à yellow à red, higher signal, more LED.
If there is strong signal around, user needs to lower the sensitivity in the 2nd stage, the Hi Signal warning will light up in red to alert the user.
This device will indicate detected signal automatically.
CAM / BUG / LTE : Analog and Spread spectrum signals of wireless camera, wireless bug, signal jammer and 2G / 3G / 4G cell phones, etc..
WiFi: Digital signals of WiFi, IP camera, wireless digital camera, etc.
Battery Low : Warning of battery power running down.
2)Charging: Indicate the status of battery charging. When starts charging, indication lights up in red as quick charging, when charging to about 70%, it will change to slow charging, the indication shift to green.
This device applies advanced technology of digital sensitivity adjustment. Press once the "- (minus) button", located at the left side of front view, can lower sensitivity one level, the detecting distance will become shorter, This function is nice for finding the location of signal source.
10. EXPERT 3G 2100 DETECTION ABILITY
3G 2100 is the most popular cell network, including voice and data communication. In many countries, cellphone will shift to 3G 2100 automatically when signal of 4G network is poor.
This device has an individual 3G 2100 detector module which has excellent detecting ability, none can compare with.
11. DISCOVER GSM / 3G / 4G BUG & TRANSMITTING SPY CAMERA
This device can detect and locate new bug (active transmitting hidden microphone) and active transmitting spy camera remote controlled by cellphone.
12. Standby / Idle Phone Registration Detection
When the signal strength of cell tower site weakens (= to low bars of cell phone), the cellphone will re-scan looking for the cell tower to do new registration automatically. Or the cell tower will reconnect and initiate registration on its own by sending a signal to the cell phone causing the phone to transmit and identify itself.
This device can detect the standby / idle phone when it does registration with the cell tower. The interval time and number of times of registration is different among different networks and cell phones.
13. WITHOUT INTERFERE WITH PERMANENT WIFI
Public and private WiFi are existing everywhere, user will be always panic when detector is alerting. This device can identify and point out WiFi signal with individual indication to reduce user's anxiety.
In the place with permanent WiFi, this device still can detect and locate different radio waves efficiently, without affection by WiFi.
14. Efficient Identify WiFi Hidden Camera
New hidden camera applies WiFi technology with smartphone app. The camera will stay idle and start sending signal when the owner activates the app to watch.
This device can surely identify the activities of WiFi hidden camera to warn the user that someone is watching you.
15. SUPPORT POWER BANK FOR LONG TIME USE
This device has Mini USB port for connecting power bank for long time use or charging the battery.
16. LENS FINDER - WIRED CAMERA DETECTION
This device has an extra Lens finder. The 8 ultra-bright lights can scan the camera lens and help to find out the wired camera by checking the reflection of illuminated light on the camera lens.
Look through the Viewfinder on Lens finder, it is more easily to identify the camera lens. This lens finder also can uncover a hidden wireless camera even the camera is turned off.
17. SEMI DIRECTIONAL ANTENNA
This device has feature of semi directional. When reducing the sensitivity to approaching the signal source, the scan angle is also changing from wide to narrow, 120 degree à 90 degree … 45 degree. This feature is very helpful in locating the signal source.
Specification * Specification may change without notice.
|50 MHz ~ 6.0 GHz
|L 11.6 x W 7 x T 3.3 cm (not include antenna)
|About 160g (not include battery)
1. 5V DC switching power adaptor
2. AAA / UM-4 rechargeable battery or dry battery x 4
1. LED indication 2. Beep alarm sound
3. Hi Signal 4. Vibration
5. Earphone silent detection
|Wireless bug (2mW)
|up to 20 feet
|up to 30 feet
|10mW 2.4GHz Wireless camera
|up to 20 feet
|10mW 5.8GHz Wireless camera
|up to 3 feet
|GSM cell phone
|up to 50 feet
|up to 14 feet
|3G 2100 cell network
|up to 25 feet
* The detecting distance will be varied depending on the signal strength.
Contact Person: Joan