Payment & Shipping Terms:
|Power:||Switch On||Beep - Vibra:||Beep – LED On, Vibration – LED Off|
|2G / 4G:||2G/4G Detection Mode||3G:||3G 2100 Detection Mode|
|Detecting:||In Detecting||GPS Tracker:||Detected Signal Of GPS Tracker|
|Battery Low:||Battery Power Running Down||Charging:||Status Of Battery Charging|
rf signal detector,
cell phone signal detector
Gps Tracker Wireless Signal Detector/Power On Self-Test Hidden Camera RF Signal Detector
VSUTG is a new model with full-featured features and a variety of trackers. It has a unique point that can clearly show whether there is a GPS locator in the car. If you want a high-end or professional GPS detector we recommend this. There is self-detection function when booting. After booting, the number is detected once from 0-8 and then it is detected. If the machine function is normal, the number will be displayed. 0-8 is also an indication of sensitivity, and there is also an automatic detection function of environmental noise. The noise is on the one hand whether the signal environment is clean or not, and on the other hand, it refers to noise. The main purpose is to tell you that it is suitable for use in this environment, if the environment Very bad, it will ring five times to tell you that it is not suitable to find tracking equipment here. There is also a radio wave intensity display function. There is a green light and a red and yellow light on the screen. If the red light is on, the signal wave is relatively strong. It can display the intensity of the wave you detect. It can be displayed by LED, etc. Power on default sensitivity function. Stop at three, this level of sensitivity is the default level that is best for satellite positioning detection. There are only two types of alarms, one is vibration, the other is hum, and the hum is the default state. In addition, it will display the detection status. When you are detecting, the yellow light will flash. When the sneak signal is detected, the blue light will illuminate to indicate that the locator is here. There is also a weak power indicator red when the battery is low when charging. The light is red when charging. There is also a sensitivity adjustment function, which can not only detect the GPS locator, but also detect the 3G4G's eavesdropper and camera. It can also be detected by the four-cell dry battery, and the charger is used directly. You can use mobile power to support the USB interface.
1. Power-on Self-test
Every time this device is switched on, this device will do power-on self-test. The 8 signal strength indication LEDs will be put out one-by-one, from 8 7 6 … to 0. The 7-segement LED also shows 8 7 6 … to 0 synchronously.
2. Auto Environment Check
After power-on self-test, this device will run auto environment check. This device will beep 5 times to notify the user if switch on this device in the place with strong noise, so as base station, TV station, construction machine or welding processing where emit or occur high electric waves.
This device will be interfered with those noises and could not be able to do detection of GPS tracker in such place, please change to another quiet place.
This advanced technology help user get good detecting result in most of places, no matter expert or novice. User never leads to poor or failed detection result.
3. Reliable Default Benchmark
The default benchmark is one of our core technology, can fit for different environments all over the world. After environment check, it will stay at default benchmark of Level 3 and the 7 segment display will show 3.
4. 8-LED Signal Strength Indication
The 8-LED bar will light up according to the signal strength from low to high, green à yellow à red, higher signal, more LED.
5. Smart Indication of All Status
|2||Beep - Vibra||Beep – LED on, Vibration – LED off|
|3||2G / 4G||2G/4G detection mode|
|4||3G||3G 2100 detection mode|
|6||GPS Tracker||Detected signal of GPS tracker|
|7||Battery low||Battery power running down|
|8||Charging||Status of battery charging|
6. Two Kinds of Warning
This device has 2 kinds of warning modes:
1) Beep: Audible alarm (default)
2) Vibra: Vibration
7.Auto Indication of Detecting Status
1) Detecting: Yellow LED blinking
2) GPS Tracker: When detected radio wave from GPS tracker, the blue LED will light up. The 8-LED of signal strength indicator will also light up and the buzzer goes off at the same time.
8. Battery & Charging Status
1) Battery Low : Warning of battery power running down.
2) Charging: When starts charging, indication lights up in red as quick charging, when charging to about 70%, it will change to slow charging, the indication shift to green.
10.Additional Bonus Feature Discover 3G/4G Transmitting Bug&Spy Camera
1) This device has additional features of exposing and searching 3G / 4G new bug (transmitting hidden microphone) and transmitting spy camera.
2) The default sensitivity is level 3 which is special for exposing GPS tracker. Press the plus (+) button in left side once, the sensitivity will increase to level 4, the 7 segment LED will show 4 and the detecting distance will become longer. The highest sensitivity level is 6.
11. Expert 3G2100 Detection
3G 2100 is the most popular cell network, including voice and data communication. In many countries, cellphone will shift to 3G 2100 automatically when signal of 4G network is poor.
This device has an individual 3G 2100 detector module which has excellent detecting ability, none can compare with.
12. Support Power Bank For Long Time Use
This device has Mini USB port for connecting power bank for long time use or charging the battery.
Specification * Specification may change without notice.
Contact Person: Nancy