Payment & Shipping Terms:
|Detecting Frequency Band:||Wireless Camera And Bug: 50 MHz - 6.0 GHz||Dimension:||L 150 X W 80 X T 30 Mm|
|Weight:||About 310g||Operation Temperature:||0 - 40 Centigrade|
|Humidity:||5% ~ 80%|
rf signal detector,
cell phone signal detector
GSM/ 3G Bug& Spy Camera Wireless Signal Detector/ Vidual & Audible Warning Modes
VS066MC, this mobile phone radio detector, which can detect mobile phones, can pass this model. With unique fuzzy scanning technology, it can detect all the 2G3g4g radio waves, including standby status. That is to say, it also has radio waves that can detect 50-6G wireless cameras. This type of anti-interference ability is relatively strong, and the anti-interference ability of the radio frequency band of the walkie-talkie is relatively strong. The built-in battery can last for four hours after being fully charged. There are two kinds of alarm modes, one is the warning tone, and the other is the kind of plugging the earphone. Sensitivity adjustment function. At the same time, there are also radio wave type indicators, which detect different types of signals and different lights will be on. There is a weak indicator light, when the light is weak, the light will be on.
1. Versatile& Wide Frequency Range
This device is a VERSATILE RF signal detector which can detect most of the wireless devices, so as GSM phone, Smartphone, WiFi, Wireless bug and Wireless camera (both analog and digital wireless cameras), etc.
This device has 2 antennas of 2 detectors, one detector is special for 3G 2100 (or 3G 1900 according to order) and another detector is a general detector covering 50 MHz ~ 6.0 GHz, with improved cellphone detection ability to make this device as a universal cellphone detector.
2. Won’t Interfere With 2-way Radio Easily
This device can detect most of 2G / 3G / 4G cellphone communications. This device is special designed insensitive with 2-way radio. It won’t be interfered with 2-way radio easily. This feature makes this device well suited to use in the places not allowed for cellphone communication and the security person communicate via 2-way radio.
3. Simple & Direct Indication
4. Vidual & Audible Warning Modes
This device will alert you with LED and beep when to detect wireless signals.
5. Distinguish The Signal Type
This device can distinguish the signal type, analog or digital.
Analog signal:Wireless bug, Video wireless camera, 2-way radio, etc.
Digital signal: WiFi, IP camera, Digital wireless camera, Cell phone, etc.
6. Discover GSM/ 3G Bug& Spy Camera
This device can detect and locate GSM / 3G bug (hidden microphone) and 3G spy camera which are applied GSM / 3G technology to be remote controlled by cellphone from anywhere.
7. Detecting Networks And Frequency Range
This device can detect most of cellphone networks and other wireless device as listed below.
8. Sensitivity Tuner And Signal Strength Indication
This device has two respective sensitivity tuners for the 2 detectors in the bottom side. The sensitivity tuner has 2 functions:
Turn the sensitivity tuner to - (minus) side to decrease the sensitivity and the detecting distance will be shorter.
9. Indication of Network and Bat Low
This device has 2 network indications (LED) of 2G / Camera and 3G to show the type of detected signal respectively. Factory default network of 3G detector is 3G (UMTS) 2100, can replace with 3G 1900 (America area) upon request.
10. Alert Indication
1. Cellphone activity detected with a network indicator.
2. Signal strength indication bar shows detected signal strength.
3. Earphone output: Use earphone hearing without other’s awareness.
4. Power on and Low battery
11. Standby / Idle Phone Registration Detection
When the signal strength of cell site weakens, the cellphone will re-scan the cell site to do new registration automatically. Or the cell site will initiate registration on its own by sending a signal to the cell phone causing the phone to transmit and identify itself.
This device can detect the standby / idle phone when it does registration with the cell site. The interval time and number of times of registration is different among different networks and cell phones.
12. Internal Battery
The device has its own internal rechargeable battery power which allows this device to be operated for 4 hours. When battery power runs down, the battery low warning indication will light up in red to warn the user.
Specially designed for easy and simple use, does not require complicated installation or any professional knowledge.
Specification * Specification may change without prior notice.
1. Built-in rechargeable battery
2. Switching power adaptor
|Battery life||About 4 hours after full charge.|
|Detecting frequency band|
1. 2G, 3G, 4G Cell networks
|Dimension||L 150 x W 80 x T 30 mm|
1. LED for cellphone activity indication
|Operation temperature||0 - 40 centigrade|
|Humidity||5% ~ 80%|
Contact Person: Joan